[ziller89]

i accidentally updated my psp 1000(IC1003) with 5.50gen-D
AND my whole Psp is not working anymore (could be on to xmb but no buttons working) !!
need Some help From u guys to help me to go back to 5.00m33 !!
ANyone PLEASE HELP !!!

[bemylovers]

Er..any picture to show?
really dun get what u mean

[Warglory]

Try checking if your power switch is in the 'hold' position.
And you may be able to use Hellcat's recovery flasher to get back to 5.00m33.
Only other option is the pandora battery (jigkick battery + MMS)

[bemylovers]

If it possible to get to recovery mode you are safe already

[ziller89]

Originally Posted by bemylovers

If it possible to get to recovery mode you are safe already

YA !! i can go in to recovery menu , everythings work fine .. the blinking graphics of the icon still there when i on my psp1000, the problem is my buttons are not working , cept when i pull down the power switch to HOLD then vsh menu pops out, when i push it up to normal again , the vsh menu selection goes to exit. and still no buttons are working ..
tried to flash it 5.00m33 b4 .. same things.. so i thought of going back to 1.5 and step by step upgrade again.. but i need some tutorial/guide for psp1006 "ic1003"

[davi5]

Just use pandora and mms.. Dont have to downgrade to 1.5

[ziller89]

Originally Posted by davi5

Just use pandora and mms.. Dont have to downgrade to 1.5

Ok, lets start over .. I had a Psp1006 IC1003(TA-82) w/3.03oe-a ,
then i use my Pandora Batt + MmS(5.50gen-D) .
after installation, i rebooted my psp .
After that it goes into xmb .. everything looks normal , volume button works, backlight button works.. BUT other buttons not working !!
so any guides or advice you guys could help me with ...
This world is big , it cant be that im the only one having this problem ~

[bemylovers]

I have encounter this problem with one of my customer before u can try bring to www.playurconsoles.com to have a look